Saturday Hornets Nest AACA show . . .
Read MoreThis car has Ford's 400 CID V8 that makes 172 hp. The 429 CID V8 was optional and made 208 hp. Once again, this was 1972 when "net" horsepower ratings were given instead of the traditional "gross," meaning everyone's numbers were down. In the plus column, the 400 produced 298 ft-lbs of torque at a very low 2,200 rpm, meaning maximum pulling power was available just off of idle.
The sixth generation of Lincoln's Mark Series was introduced for the 1984 model year and was very significant in a number of ways. Visually, the sharp angular lines of the Mark V and VI were replaced by a modern aerodynamic shape. Under the skin, emphasis was placed on giving the car better handling characteristics than in the past. The LSC package added further suspension upgrades, better seats, and different interior and exterior trim. In 1986, the LSC received the 200 hp 5.0L "HO" V8 from the Mustang GT, (which increased to 225 hp in 1988), making the car a decent performer. MotorWeek ran the quarter-mile in 15.6 seconds with their test car !
Chrysler boss Lee Iacocca came to the company in 1978 in an attempt to keep it from going belly-up, which was a real possibility at that time. In addition to the very successful K-Cars and Minivans, Iacocca also envisioned an "image car" that would take the company upscale and boost showroom traffic. In 1984, Chrysler partnered with Maserati to develop a luxury sports coupe.
The planned "TC", or Turbocharged Convertible, was based on the LeBaron chassis. The car's beautiful handcrafted body was mated to Chrysler's 2.2L turbocharged inline 4-cylinder engine that made 160 hp. A 5-speed manual transmission was available and connected to a 200 hp version that featured a DOHC Maserati cylinder head fabricated by Cosworth. Hand-stitched Italian leather filled the cabin which featured all available creature comforts from the day. Final assembly took place in Milan, after which completed cars were sent back to the US to be sold in select Chrysler dealers.
In other words, the Chrysler TC by Maserati looked good on paper. So why did this car end up being considered a $600 million failure ?The original plan called for the TC to be introduced in 1987 ahead of the newly redesigned LeBaron. The thinking was that the TC would lure customers into the showroom. Buyers who liked the car's looks, but couldn't afford its $33,000 price tag could then be shown a new LeBaron convertible that was cheaper, but still looked a lot like the flagship.
The problem was that the TC was introduced in 1989, a full two years after the LeBaron. Now, the psychology was reversed. The TC ended up being viewed as a mildly modified LeBaron that cost more than twice the price. Buyers stayed away in droves. A total of 7,300 cars were produced over the car's three year run. The 1991 model seen in the photos above is from the last year of production, and is one of 1,636 made that year.This was the introductory year for the original 8-Series coupe. A 296 hp 5.0L V12 engine sits under the hood, and could be mated to a 6-speed manual transmission. Unfortunately, the car's power and stunning good looks weren't enough to keep it from being regarded as a letdown when introduced. Not that the car was bad, because it wasn't by any means. It just didn't live up to the standard implied by its near $90,000 price tag. Even so, BMW sold 9,517 cars world-wide in 1991.
1991 Buick Reatta convertible, Class 27S, (production vehicles, 1990 - 97).
In addition to having a large turnout from the East Coast Reattas club inside the speedway, I spotted two more Buick Reatta convertibles in the AACA show. The car seen in the photo above is an extremely rare 1991 model, and is one of only 305 made that year.